Circuit Soldering Competition Record
Preface
In November 2019, after two days of basic soldering training, the new members of the Wolf Pack's electronics team achieved impressive results in the soldering competition organized by the Electronics Association. The following is a summary of the training materials for this event, with the hope of providing assistance to newcomers in the field of soldering.
Training Content
- Quick Reference Hardware Documentation by Bobi & Power
- Hardware Fundamentals Course - Teaching Outline by Power
- Physical Components - Diagrams for Reference by Bobi
- Pre-Competition Preparation - Explanatory Outline by Bobi & Power
Competition Experience Summary
- It is recommended to use pin-and-solder combinations for backside wiring of the perforated board for stability and speed. During the competition, pay special attention to time management.
- It's advisable to bring your own test power source. After soldering, you can test whether the circuit works properly. Make sure to have all your essential tools ready.
Original: https://wiki-power.com/ This post is protected by CC BY-NC-SA 4.0 agreement, should be reproduced with attribution.
This post is translated using ChatGPT, please feedback if any omissions.